Causes of paint fog in the paint room of automobile furniture

Causes of paint fog in the paint room of automobile furniture

Nowadays, the application of paint booths for automobile furniture has become more and more extensive, but sometimes we may find that the paint mist in the paint booths cannot get out. Why? For this problem, we have summarized the following reasons for everyone, let's take a look.

1. Is the dust of the filter cotton too thick? Look at the filter cotton outside the fan. If the dust is too thick, there will be no wind, and the pressure in the paint booth will not be enough, so the excess paint mist cannot be suppressed.

2. Is the water in the pool too deep? If the water in the pool is too deep, the air outlet cannot be guaranteed to blow out normally. The paint mist will not run out for a while and will be in the paint booth, affecting product quality and health of painters.

3. Whether the spraying position is correct, it is recommended to use a rotary spraying platform as the operating platform, and it is forbidden to spray the paint with the back of the air outlet, so that the paint mist will string up and will pounce on the operator's body.

4. The fan power is equipped with less power and the pressure is not enough.

The above is the reason for the paint fog in the car furniture baking room. After understanding the reason, we can find the right solution.