What are the advantages of the car paint booth?

What are the advantages of the car paint booth?

 The paint room has the following advantages:

    1. The car paint booth is a complete set of large equipment. Cars generally undergo pre-treatment before use. This not only eliminates the drawbacks of manual processing, improves work efficiency, and can also improve the quality of the paint surface in the car paint repair operation. This is not only because the paint booth can heat up the paint uniformly and quickly dry according to the settings of the operator, but also the paint booth can isolate the car paint from pollution caused by external dust and other pollutants, so that subsequent polishing and other paint treatments can be omitted jobs.

    2. Good working environment. In order to keep the air in the paint booth clean, various types of paint booths are equipped with filter devices, such as filter cotton, which is used to filter the dust in the air entering the paint booth, and the ventilation system of the paint booth will make the paint booth. There is enough air exchange rate to ensure the clean air in the paint booth. In many cases, the pollution of the paint surface of the car body is caused by human factors. For example, the vehicle to be painted enters the paint booth without thorough cleaning, or the painter does not wear special protective clothing, or the paint booth is not clean.

    3. High working efficiency and guaranteed quality. Compared with manual painting and baking, the car paint booth is a mechanized "one-stop" service, and the work efficiency is several times, even dozens of times higher. Moreover, when painting, the outside air is filtered by the primary filter and sent to the roof by the fan, and then filtered and purified by the top filter to enter the room. The air in the room adopts a full-down type, flowing downward at a speed of 0.2-0.3m/s, so that the paint mist particles after painting can not stay in the air, but are directly discharged out of the room through the bottom air outlet. Such continuous cycle conversion makes the air cleanliness in the room reach more than 98% during painting, and the air sent in has a certain pressure, which can form a constant airflow around the car to remove excess paint, so as to guarantee the maximum The quality of the spray paint. The paint surface is smooth and uniform without impurities, and the polishing degree is high.

    Fourth, the safety factor is high. The car paint room is generally equipped with a constant temperature controller and a safety and explosion-proof system. When the car paints, the air door is adjusted to the paint position, the hot air is circulated, and the temperature in the baking room rises rapidly to the predetermined drying temperature (55℃-60℃). The fan filters the external fresh air, exchanges heat with the heat energy converter, and sends it to the air chamber on the top of the paint booth. After a second filtration and purification, the hot air passes through the internal circulation of the air door, except for a small amount of fresh air. , Most of the hot air is continuously heated and utilized, which gradually increases the temperature in the paint booth. When the temperature reaches the set temperature, the burner will automatically stop; when the temperature drops to the set temperature, the fan and burner will automatically turn on again to keep the temperature in the paint booth relatively constant. *When the paint baking time reaches the set time, the paint booth will automatically shut down and the paint construction will end safely.