Powder Coating Equipment
If you are interested in the powder coating equipment, please be free to wholesale the quality and durable equipment made in China with our factory. We are one of the leading and professional spray paint booth manufacturers and suppliers in China. We are always at your service.
WLD-PC Powder coating equipment introduction
Filter element powder-recycling system Booth
|
1) Name：WLD type power-recycling equipment. |
|||
|
2) Equipment body size：L3700mm×W2360mm×H2370mm |
|||
|
3) Recycling adopts filter element power-recycling system,configured with polyester fiber filter element,filter material from Taiwan. |
|||
|
4) Filter element cabinet design is flat basic type,convenient for Powder recycling. |
|||
|
5) Back flushing adopts high compressed air,the flushing time controlled by circuit board,back flushing gap fixed at 60 seconds,back flushing time 1 second. |
|||
|
6) Electrostatic powder painting adopts compressed air which processed by drying,drying air compressor equipped by 1.0m3min.(air compressor provided by customer themselves) |
|||
|
7) Material bill technical index: |
|||
|
Number |
Item |
Material bill,specifications and parameter |
Remark |
|
1 |
Room body wall panel |
Power coating galvanized steel panel |
1.2mm |
|
2 |
Bottom panel |
Power coating stainless panel |
2.0mm |
|
3 |
Lighting fixture |
Autifog lighting fixture |
2 lamps |
|
4 |
Air tank |
Seamless steel pipe |
ø 140、outfall setted |
|
5 |
Air pipe, piece |
Galvanized pipe,piece |
1 inch |
|
6 |
Fan |
Model 4-72-4.5A |
1 set Power supply 380v |
|
7 |
Air Flow：9800m3/h |
||
|
8 |
Full pressure ：1320pa |
||
|
9 |
Power 7.5KW |
||
|
10 |
Filter element specs |
φ325×600 |
5 pieces |
Advantages:
High powder recycling rate,can reach 95%,save material and energy,
The recycled powder can be used again and again,continuously working available;
Cover small place and low noise;
Safe and reliable,the service life over 10 years.
You Might Also Like
Send Inquiry