Activated Carbon Adsorption Cabinet

Activated Carbon Adsorption Cabinet

First, technical parameters

Fan power 5.5KW

Air volume 15000m3/n

Pressure 850pa

Glass fiber layer 2 layers

Honeycomb activated carbon layer number and total 2 layers, about 120 pieces

Second, composition: cabinet, activated carbon filling layer, gas distributor, exhaust gas pretreatment layer, exhaust fan.

 

Third, the principle:

When the gas molecules move to the solid surface, gas is caused by the interaction between the gas molecules and the solid surface molecules.

The body molecules temporarily stay on the solid surface, and the concentration of gas molecules on the solid surface increases. This phenomenon is called gas in the

Adsorption on solid surfaces. The adsorbed material is called adsorbent, and the adsorbed material is called adsorbent. The activity

The carbon adsorption method uses activated carbon as an adsorbent to adsorb the vapor of organic solvent in the exhaust gas to the surface of the solid phase for adsorption.

With concentrated, so as to achieve the method of purifying exhaust gas.

Exhaust fan

Cabinet

Activated carbon filler

Gas distributor

Exhaust gas pretreatment or ground cotton

Explanation: Exhaust gas is discharged from the bottom of the barn, after pretreatment of the exhaust gas, after pretreatment, distributed by the gas distributor

After each layer of activated carbon is adsorbed by activated carbon, it is pumped from the top of the environmental protection cabinet by the suction fan.

Pipes are discharged outdoors.