Composition and daily maintenance of electrostatic coating equipment

Composition and daily maintenance of electrostatic coating equipment

The electrostatic spraying equipment consists of two parts: spraying and drying. The working mechanism includes a spray chamber equipped with nozzles, a leather conveyor belt, a drying system, and a cleaning mechanism. The atomization source of electrostatic spraying equipment is composed of a power source and a high-pressure pump; The atomization source of the electrostatic spraying machine is composed of a high-frequency and high-voltage electrostatic generator.

Daily maintenance methods for electrostatic spraying equipment: maintenance of the spraying line and spraying room. If the air supply system of the spray cabinet is blocked or has too much dust, the air filter cotton needs to be replaced. After about three days, the oil pollution filtration system behind the spray cabinet needs to be cleaned. At the same time, it is necessary to periodically clean the oil stains on the conveyor chain and add butter. Maintenance of fuel supply system. When the sprayer needs to be stopped after use, open the paint reflux valve to allow the paint to flow back to the ink tank. Take out the ink tank and pour the cleaning solvent into the mixing tank and start the oil pump. Also, open the reflux valve and spray gun to a larger position to allow the cleaning solvent to flow in the oil pipe and clean the spray gun and oil pump. Pumps and spray guns, due to their high accuracy, should not be disassembled randomly during cleaning to avoid damage.

The above is the composition and daily maintenance of the electrostatic coating equipment that we have introduced to you. We hope our introduction can be helpful to you.