Ideal conditions for car paint booth customization

Ideal conditions for car paint booth customization

If you want to customize a car paint booth, you need certain conditions, and the conditions are divided into good and bad. Now we need to understand the ideal conditions for its customization to make our products more competitive.

1. Air flow and filtering effect. This depends on the model of the roof cotton. Generally, the repair shop uses two models, EU5 and EU6. You can use the sun lamp to illuminate the upper part of the room when using the paint room, usually per square meter Very fine dust should be less than 5 pieces.

2. Use a light close to the D65 light source. At the same time, the walls in the room should be matte white, and the wall sealing effect. The paint room must be sealed, and there should be no paint dust accumulation at the joints to ensure positive pressure. The inlet air volume should be slightly larger than the air outlet volume to keep the paint booth under positive pressure.

Third, the sealing effect of the heating system should be well sealed around the burner and chimney, and no burnt putty should appear.

Fourth, the heating rate of the car paint booth, the time it takes for the paint booth to rise from 20°C to 60°C is about 10-15min. At the same time, it should be noted that the thermometers in some paint booths are not accurate. When measuring the temperature, the temperature of the metal body in the paint booth should be used. Prevail.

If the custom-made conditions of the car paint booth meet the above four points, I believe the product will be very good. Good conditions are the prerequisite for the completion of the work, so before doing something, you must be well prepared.