Painting Process Of Car Paint Booth

The roof of the car paint booth is a two-layer air filtration system, high-efficiency three-dimensional rubber filter cotton. In order to let the users use our equipment better, we need to paint it. This is a technical activity, and the average person is not competent. However, as a consumer, we can simply understand the painting process of the car paint booth.

1. Turn on the main switch and turn on the indoor light. The furniture is ready for painting and the paint button is activated.

2. After the painting is completed, remove the unnecessary items in the paint room, turn off the lights, and turn off the main switch when no paint is needed.

3. Press the paint temperature button. When the temperature is lower than 20 degrees, you can use the car paint room temperature button to adjust the temperature according to your own level and turn on the fuel switch.

4. Check the temperature of the car paint booth and adjust the temperature specified by the paint process according to the weather changes.

5. When the temperature is higher than the average temperature of the paint, the painter should adjust the paint ratio and achieve better results as needed.

In the painting process of the car paint booth, the idlers should not be close because the technical operation cannot be disturbed. The entire painting process changes the traditional working mode of painting and baking paint, saving space and improving work efficiency.