Precautions When Using The Car Paint Booth

1. The air entering the car paint booth is the main source of pollutants. When not using the car paint booth, the door of the paint booth should be closed. It is strictly forbidden to open the door of the paint booth for a long time. In many repair shops. The putty work of the putty is often carried out in an area close to the paint booth. A large amount of dust is generated during the process of polishing the putty. A large amount of dust such as putty ash can easily enter the paint booth with the flow of air. If the putty is taken, Dust-free dry grinding technology, the situation will be relatively better, if the manual grinding method is adopted, the pollution will be very serious. Therefore, in the repair shop, the putty grinding work should be carried out in the area away from the paint booth.

2. When the paint room is working, the ventilation fan will draw in the outside air, and the filter cotton on the ceiling of the paint booth will be blown downwards. The air is drawn out of the paint booth on the floor of the paint booth, and the airflow is created in the paint booth. In this way, even if there is a small amount of dust in the paint booth, it will not fly. The filter cotton on the ceiling of the paint booth can filter out most of the dust, so as to keep the air in the paint booth clean. Therefore, the paint booth roof should be replaced regularly. Filter cotton on the cotton and paint room floor.

3. The vehicle to be sprayed is usually the largest source of pollution in the paint booth. The wheels, bumpers and engine compartments will collect a large amount of pollutants. Thorough body cleaning can reduce the impact of these pollutants on the painting operation. Therefore, Good preparations such as body cleaning are very important.

4. Work clothes worn by paint operators are also an important source of pollution. In many repair shops, the work of polishing putty and painting paint is done by the same person. Many workers wear the same overalls when polishing putty and when spraying paint. Incorrect, there should be special overalls when spraying the paint. In the paint booth, wear non-fiber off work clothes, rubber gloves, protective masks and respirators. Keep this in the paint. Wear. Those who do not wear special overalls are strictly forbidden to enter the paint booth, but can only view the painting work from the window to avoid contaminating the paint.

5. In addition to the work that must be done in the paint booth, such as covering the body and spraying, other body preparation work and paint mixing work should be carried out outside the paint booth. Some repair shops even wash the vehicle or polish the putty in the paint booth. Serious violation of the practice of refinishing practices.

6. Spraying equipment such as spray gun should be kept clean. The spray gun should be cleaned in time after each spraying operation to prevent the paint in the spray gun from drying out. After the paint is dry, it will condense into pieces. If the dried paint flies out during spraying, it will be Defects are formed on the paint surface.

7. After each painting work is completed, the floor and wall of the paint booth should be cleaned, and the coverings and other items used when covering the body should be cleaned. When spraying, try to cover the body with a disposable cover, and try not to use cotton. Cover the car and the wheel cover, because the car is easy to collect dust.

8. Do not place any parts such as parts and paint cans in the paint booth, because these things will accumulate dirt and eventually contaminate the vehicles to be sprayed. Spray guns, paper tape, putty, clothing and overalls should not be stored in the open. In the environment, these items should be placed in a closed and ventilated storage room.

In short, in order to ensure the quality of the paint spray, the maintenance of the environment and the strict operating specifications of the car paint room are very necessary.