Several methods for judging the quality of paint booth

Apr 22, 2019

Leave a message

The choice of baking room is still very difficult for some laymen. They don't know where to start, so they choose the paint room with good quality. Here are some ways to judge the quality of the paint room.

1. Firm house, the EPS material density of the paint booth should reach 14kg/m3. The thickness of the gates, floors, cabinets, girders and other steels must meet the requirements. In this way, the paint booth can bear the weight and be safe.


2. Brightness, the brightness of the paint room needs to reach 800-1000 lux, and the light of the near D65 light source is needed, and the wall inside the room should be matte white;

3. Air flow;

4. The filtering effect depends on the model of the top cotton of the paint. The general repair shop uses two models, EU5 and EU6. You can use the sun light to illuminate the upper part of the room when using the paint room, usually very fine dust per square meter. Should be less than 5;

5. Wall sealing effect, the paint booth must be sealed, and there should be no accumulation of paint dust at the joints;

6. Ensure positive pressure, the air volume of the paint booth should be slightly larger than the air volume, so that the paint room is kept under positive pressure;

7. The sealing effect of the heating system should be well sealed around the burner and the chimney, and the putty after burning should not appear;

8. Heating rate, the time taken for the paint room to rise from 20 °C to 60 °C is about l0-l5min. At the same time, it should be noted that some thermometers in the paint booth are not allowed. When measuring the temperature, the temperature of the metal body in the paint room is subject to the temperature.

If the selected paint room can meet the above conditions, it is an ideal paint room. However, during the accumulated use of the paint, the quality of the paint room will be poor, the dust in the room will be more, the construction effect will be poor, and the lighting effect will not be Many situations, such as Jia, in fact, as long as everyone can properly use and maintain the paint room, these problems can be completely avoided.


Send Inquiry