The Application Of Wheel Alignment Machine

Mar 28, 2018

Leave a message

Wheel alignment machine is used to detect the vehicle wheel positioning parameters, and is compared with the original design parameters to guide the user to locate the wheel alignment parameters.

The number is adjusted accordingly to meet the original design requirements in order to achieve the desired automotive driving performance, namely, precision measurement instruments that are easy to operate, reliable, and reduce tire wear.

The CCD automobile four-wheel locator is a data acquisition part with four measuring probes. The sensor (CCD) in the measuring probe respectively senses the light coordinates of the infrared emitting tube on the measuring probe opposite to it, and transmits it to the wireless receiver in the cabinet through the wireless transmitter, and then transmits it to the computer host through the COM port in the industrial control computer. Perform operations and processing. Since the CCD sensor reflects its own relationship with the corresponding infrared transmitting tube on the measuring probe, and the measuring probe is connected with the car rim via four clinchers, the correlation between the four rims can be measured through the eight CCD sensors. , In order to determine the positioning parameters of the wheel; 8 CCD sensors form a closed quadrilateral, which can realize the four-wheel positioning measurement of the vehicle. In practical applications, the eight CCD sensors on the four measuring probes are equipped with a filter in front of the lens to eliminate the interference of visible light on the bright spot images of the infrared emitting diodes.

The data processing part is a four-wheel locator host, which mainly includes a set of computer system, power supply system and interface system. Its role is to realize the user's command operation on the four-wheel locator, collect and process the image data of the sensor, display it together with the original design parameters, guide the user to adjust the wheel of the car, and finally print out the corresponding report.

purpose

The diagnosis of the above-mentioned uncomfortable symptoms of the vehicle is diagnosed by the positioning angle measurement and is treated. It is divided into front wheel positioning and rear wheel positioning. The front wheel positioning includes the kingpin caster, the kingpin caster, the front camber, and the front wheel toe. The content of the rear wheel positioning includes the wheel camber and the rear wheel toe. Under normal circumstances, three months after the new car is driven, four-wheel alignment should be performed. After every 10,000 kilometers, the tire should be replaced. If a collision occurs, four-wheel alignment should be done in time.

Above talked about the importance of car four-wheel alignment, the following talk about the problems that should be paid attention to when doing four-wheel alignment. When choosing a car maintenance shop, we must choose a professional car maintenance shop, because the technicians with experience, technology and advanced technology Four-wheel alignment instrument can provide the best service for your car. With the evolution of the suspension system from simple to complex, its structure is increasingly complex and the corresponding requirements for four-wheel alignment angles are also getting higher and higher. The four-wheel locator was specified for a certain type of vehicle, but the four-wheel locator is not an instrument for adjusting or changing the positioning angle. It is only used to measure the positioning angle. Then, the technician uses this as a reference and compares it with the angle set by the original manufacturer. The positioning angle is adjusted and changed to restore the original design angle.

In addition, the main factors influencing the four-wheel alignment are: (1) high-speed driving on uneven roads; (2) impact of external forces on the front wheels, steps on the sidewalks, etc.; (3) frequent blows in situ; (4) tires Pressure exceeds the standard range. Therefore, the majority of riders should pay attention to the following points when maintaining your car: (1) When passing obstacles, try to slow down and walk around; (2) The pattern of front tires must be consistent to ensure optimal driving. Performance, to prevent the lack of adhesion, noise, side slip, eccentric wear and other phenomena; (3) After the tire is updated or repaired, the tire dynamic balance test must be carried out.

cart

The trolley locator measures the camber of the wheel with the data box, measures the caster and caster angles of the kingpin with the data box with the dial, and measures the front to the front (or minus) of the wheel with a laser and a specially-calibrated scale and scale. Beam) and the geometry of the front and rear workshops. Among them, the camber of the wheel, the inclination of the kingpin, and the inclination of the kingpin are the resolution 6′, the measurement error is not more than ±3′, the resolution of the wheel steering angle reading is 6′, and the measurement error is not more than ±6′. The beam is measured by a laser using the principle of ray amplification, so the measurement is accurate, which provides a reliable measurement method for the wheel positioning parameters and provides a reliable basis for the correct positioning of the wheel, especially the steering wheel. Because the instrument does not need to be installed, it has a small footprint. It's easy to carry, so it gives you great convenience.

3D automobile four-wheel aligner has entered the country, only two or three years time has swept the country, this type of product with high measurement efficiency, low failure rate and high-tech elements and other advantages have been widely recognized by users, in China's auto maintenance industry Being used by more and more users, it has greatly replaced the traditional laser and CCD four-wheel locator.


Send Inquiry