Cleaning And Inspection Of Paint Room

1, daily cleaning room walls, glass and pedestal, lest dust and lacquer accumulation;

2, every week clean into the wind dust net, check the exhaust dust NET is the accumulation of plug, such as the air pressure increase in the room, must replace the exhaust dust nets;

3, each working 150h should be replaced by the station dust-isolating fiber cotton;

4, each working 300h should be replaced by the air dust net;

5, a monthly clean water pan, and cleaning the burner on diesel filtration equipment;

6, each quarter should check the inlet and exhaust motor drive belt slack;

7, every six months should clean the entire paint room and the ground seat, check the circulating wind valve, inlet and exhaust fan bearings, check the burner exhaust channel, clean the tank's sediment, clean the paint room water-borne protective film and re spraying;

8, each year should be cleaned the entire heat exchanger, including the combustion chamber and exhaust channels, each year or every 1200h of work should be replaced the paint roof cotton.