How Is A Car Paint Booth Working?

Painting, the external air filter through the primary filter by the fan to the roof, and then through the top of the filter after the second filter purification into the room. The room air is fully down, with 0.2-0.3m / s speed down, so that after painting paint mist particles can not stay in the air, and directly through the bottom of the outlet was discharged outside the room. So that the cycle of continuous conversion, so that when the indoor air cleanliness of more than 98%, and the air into a certain pressure, can be formed in the car around a constant air to remove excess paint, so as to maximize the guarantee The quality of painting.

Paint, the throttle will be transferred to the paint position, hot air circulation, the temperature inside the barn rose to a predetermined drying temperature (55 ℃ -60 ℃). The fan will be the external fresh air after the initial filter, and heat exchanger heat exchange to the top of the paint room after the air chamber, and then after the second filter purification, hot air through the internal circulation of the throttle, in addition to suction a small amount of fresh air outside , Most of the hot air has been heated to continue to use, making the paint room temperature gradually increased. When the temperature reaches the set temperature, the burner automatically stops; when the temperature drops to set the temperature, the fan and burner and automatically open, so that the paint room temperature is relatively constant. Finally, when the paint time to set the time, the paint room automatically shut down, paint the end.