Several Measures To Buy Lacquer Room

① brightness, paint room brightness need to reach 800-1000 lux, and need to use near D65 light source, and the walls of the room should be matte white;

② air flow;

③ filtration effect, this is to see the model of baking lacquer roof cotton, the general repair shop uses the EU5 and EU6 two models, can use the paint room in the room with the sun lamp irradiation in the upper part, usually very small dust per square meter should be less than 5;

④ Wall Sealing effect, the paint room must be sealed, and there should be no accumulation of lacquer dust at the seams;

⑤ to ensure positive pressure, the air intake of the paint room should be slightly greater than the air volume, so that the baking room remained in the state of positive pressure;

The sealing effect of the heating system should be sealed well around the burner and chimney, and the oil ash after combustion is not possible.

Temperature rise speed, the baking room from 20 ℃ to 60 ℃ to use the time is about L0-l5min, at the same time should pay attention to some baking room thermometer is not allowed, measuring temperature to paint the room in the metal body temperature. If the choice of the baking room can meet the above conditions, it is an ideal paint room. But in the cumulative use of the process, there will be the quality of baking room, the room dust more, the construction effect is not good, the lighting effect is poor and so on many conditions