Several Measures To Buy Lacquer Room

Today is here by me to give you a brief introduction about the purchase of baking paint room Several factors of relevant information, hope can help people in the future use of the time can be used, please follow the small series together to understand the following information about it.

① brightness, paint room brightness need to reach 800-1000 lux, and need to use near D65 light source, and the walls of the room should be matte white;

② filtration effect, this is to see the model of baking lacquer roof cotton, general repair shop used with EU5 and EU6 two models, can be used in the paint room in the room with the sun lamp irradiation in the upper, usually a very small square meters of dust should be less than 5 million;

③ Wall Sealing effect, the paint room must be sealed, and there should be no accumulation of lacquer dust at the seams;

④ guarantee positive pressure, the air intake of the paint room should be slightly greater than the air flow, so that the baking room remained in the state of positive pressure;

The sealing effect of the heating system should be sealed well around the burner and chimney, and the oil ash after combustion is not possible.

⑥ warming speed, paint room from 20 ℃ to 60 ℃ to spend about the time is l0-l5min, at the same time should pay attention to some paint room thermometer is not allowed, measuring temperature to paint the room in the metal body temperature. If the choice of the baking room can meet the above conditions, it is an ideal paint room. But in the cumulative use of the process, there will be the quality of the baking room, the room dust more, the construction effect is not good, the lighting effect is poor and so on many conditions!