Car paint room and fan design matters

Car paint room and fan design matters

Because the fan is made of double-sided air intake, it is small in size, large in air volume, and small in vibration. It is precisely because of its characteristics that it is applied to the paint booth. The standard car paint booth requires 2 to 3 fans. There are two fans, both imported fans. The air flow in the Weilongda paint booth is completed by the top pressure air. An air outlet fan is more reasonable. . The fan on the configuration and the design problem of the car paint booth.

1. Gas-water separation and sedimentation should be sufficient and easy to clean.

2. The water-washing atomization nozzle and pipeline should be easy to disassemble, replace and clean.

3. Determine a reasonable average flow rate of the horizontal air in the spray booth, and match the air supply and exhaust systems reasonably to ensure a slight positive pressure in the spray booth. The thickness of the water curtain should be uniform. Pay attention to the structure of the upper sink and the distribution of the water supply pipeline.

4. The distance from the bottom of the water curtain plate to the liquid level of the sink should be reasonable.

5. Determine a reasonable configuration form, and determine a reasonable average flow rate of the horizontal air in the spray booth.

With the continuous improvement of the performance advantages of the automobile paint booth, the related performance of the fan needs to be changed in order to better adapt to the work requirements.