Daily maintenance of the paint booth

Daily maintenance of the paint booth

Maintenance of filtration system

    The filtration system is an important part of the spray booth. Generally, the filtration system of the Weilongda spray booth is composed of the following materials: primary filter cotton, sub-high efficiency filter cotton, glass fiber

Filter felt, activated carbon.

    1. The primary filter cotton is mainly used for the primary filtration of the original air, and the replacement cycle is generally about 100 hours, and it can also be determined according to the specific situation.

    2. Sub-high efficiency filter cotton is used for the secondary filtration of air, and its replacement cycle is generally about 400 hours.

    3. The glass fiber filter felt is mainly used for the collection of organic matter in the exhaust gas. Generally, there are two glass fiber filters in the paint room, and the replacement cycle is generally 80-120 hours.

    East activated carbon is used to absorb paint exhaust gas in paint mist. Check the activated carbon filter every 7 days. If the activated carbon surface is full of paint and affect the exhaust, the activated carbon should be replaced in time

Carbon to ensure smooth discharge of phoenix.

    Maintenance of seals

    In order to ensure the airtightness of the space in the spray booth, seals must be used in many places in the spray booth. The gas inside the spray booth is corrosive during operation.

Most of the seals in the room are rubber parts, which are less corrosive. Therefore, in the process of using the paint booth, the seals must be replaced according to the actual conditions. At the same time, the baking

The sealant at the junction of the room components will age due to long-term use. At this time, the old sealant should be treated according to the actual situation, and the sealant should be reused for sealing treatment.

To ensure that the air in the room is clean during operation.

    Maintenance of electrical components

    The control system is the "brain" of the spray booth. It directly commands the spray booth to complete various operations. Therefore, it is very important to ensure the stable performance of its control components.

During the process, the performance of its components must be checked regularly to ensure that it can accurately execute various instructions and complete the work smoothly.

    Maintenance of transmission parts

    The transmission part of the baking barn is mainly the transmission between the motor and the fan. Due to the relatively frequent use, the transmission belt of the motor and the fan will have a certain degree after the Weilongda baking room has been working for a period of time.

The degree of loosening and abrasion depends on the specific conditions. Adjust the tension of the belt and replace it if necessary to ensure the best performance of the fan. In addition, in the fan

There are oil filling holes on the bearing covers on both sides. Lubricating oil should be added to the bearings on the fan regularly to ensure smooth operation.

    Burner maintenance

    Burners mainly provide heat sources for the paint booth. According to the fuel, they can generally be divided into two types: oil and gas. For oil burners, maintenance mainly includes:

Check the oil pipes to ensure that there is no leakage in the oil pipes; check the diesel filter regularly to ensure that there is no clogging; clean the fuel injector regularly; replace the intake filter of the burner regularly to ensure

The air intake is clean.

    Other daily maintenance

    In order to ensure the performance of the spray and baking booth, other necessary daily maintenance should be done, mainly: ensure the tightness of the bolts at the joints of the sanitary inspection in the room. Clean the condition and inspect the room body

The surrounding environment, to ensure that the paint room is not safe during use. Note: All inspection and maintenance work must be carried out by qualified personnel. During inspection and maintenance

The following must be ensured:

    a. No workpieces should be placed in the paint room;

    b. Turn off the grill i) the main power supply and set a warning sign at the main power supply;

    c. All replaced filter cottons must be treated specifically, and old filter cottons must not be treated like ordinary garbage.

发送反馈

历史记录