Features of Automobile Paint Booth

. Good auto Paint Booth has the following advantages:

         1. The pre-treatment is fast and the effect is proud: the car paint booth is a complete set of large equipment. The car is normal before use

To go through pre-processing. This not only eliminates the drawbacks of manual processing, improves work efficiency, but also improves the vehicle

The quality of the paint surface during paint repair operations. This is not only because the paint booth can make the paint evenly according to the settings of the operator

Heat up and dry quickly, and the paint booth can isolate the car paint from pollution caused by external dust and other pollutants.

It can save the follow-up polishing and other paint finishing work.

     

         2. Good working environment. In order to keep the air in the paint room clean, various types of baking

The paint booth is equipped with filtering devices, such as filter cotton, which is used to filter the dust in the air entering the paint booth, and the baking

The ventilation system of the paint booth will allow sufficient air exchange rate in the paint booth to ensure the clean air in the paint booth.

In many cases, the pollution of the paint surface of the car body is caused by human factors. For example, the vehicle to be painted has not been thoroughly painted.

Enter the paint booth when cleaning, or the painters are not wearing special protective clothing, or the paint booth is not clean, etc.

 

         3. High working efficiency and guaranteed quality. Compared with manual painting and baking, the car paint booth is mechanized"

"One-stop" service, the work efficiency is several times, even dozens of times higher. Moreover, when painting, the outside air

After the primary filter is filtered, it is sent to the roof by the fan, and then filtered and purified by the top filter to enter the room.

. The air in the room adopts a full-down type, flowing downward at a speed of 0.2-0.3m/s, so that the paint mist particles after spraying cannot

It stays in the air, and is discharged out of the room directly through the bottom air outlet. In this way, the continuous cycle conversion makes the spray paint

The air cleanliness in the room is above 98%, and the air sent has a certain pressure, which can form around the car

A constant air flow to remove excess paint, so as to maximize the quality of spray paint. Smooth paint

Even without impurities, high polishing degree.

     

        Fourth, the safety factor is high. Weilongda car paint booths are generally equipped with thermostats and safety explosion-proof systems. Car paint

When the air door is adjusted to the baking position, the hot air is circulated, and the temperature in the baking bar rises to the predetermined drying temperature (55℃

-60°C). The fan filters the fresh air from outside, exchanges heat with the heat converter, and sends it to the grill.

The air chamber at the top of the paint booth is filtered and purified for the second time. The hot air passes through the internal circulation of the air door, so that there is less

In addition to the amount of fresh air, most of the hot air is continued to be heated and used, which gradually increases the temperature in the paint booth.

When the temperature reaches the set temperature, the burner will automatically stop; when the temperature drops to the set temperature, the fan and combustion

The burner is automatically turned on again to keep the temperature in the paint booth relatively constant. Finally when the paint time reaches the set time

At the time, the paint booth will automatically shut down, and the paint construction will end safely.