Requirements for the installation site of the car spray booth

Requirements for the installation site of the car spray booth

    Automobile baking barn is a kind of baking barn specially researched and developed for automobile paint. It is mainly used for baking paint on the surface of the car. The use temperature is about 0-60 degrees. The color of the room body is generally sky blue, orange red, beige, etc. Commonly used heating methods for car baking rooms are infrared heating and fuel heating. The temperature is uniform, especially for the better effect of baking paint, which can effectively improve the quality of the paint surface, increase the paint film and increase the strength and toughness; Longxing launched this car baking room also has the advantages of low carbon, environmental protection, and low failure. It is a good partner of choice in the automotive decoration and beauty industry.

Requirements for the installation site of the automobile spray booth:

1. Clean and inspect the ground: the ground level is required to be good, and the nine-point error does not exceed 5mm. For details, please refer to the "Schematic Diagram of Base Level Inspection";

2. Smooth, clean and dust-free: It is recommended that customers use waterproof glue or terrazzo on the ground to ensure dust-free;

3. The thickness of concrete is 200mm, and the bearing capacity per square meter is not less than 1000kg.

4. The floor size requirements refer to the size of the paint room

5. The installation environment must be safe and free of flammable and explosive materials;