Furniture Paint Room Equipment System Description

The furniture paint baking room mainly undertakes the painting and drying work of the workpiece, so that the surface of the workpiece forms a dense anti-corrosion film layer, and has good appearance quality to improve the anti-corrosion performance and decorative performance of the product. The spray booth and the paint booth have ventilation and illumination. Air purification, heating, heating and heat preservation, paint mist treatment function, frequent air exchange times, drying room with fast surface drying, so that the surface of the sprayed object is dry, dust-free particles adhere to the paint layer. At the same time, it also has a fault alarm. And exhaust gas treatment function.

Furniture spray paint room equipment system description

1. Equipment purpose: used for painting and drying the outer surface of the workpiece.

2, working principle:

When the paint room is painted, the external air is filtered by the primary filter cotton of the air inlet, and then sent to the static pressure chamber of the paint room by the fan. After the second filter is purified by the top filter cotton, it enters the working space of the paint room, and the airflow is from top to bottom around the workpiece. The wind curtain is formed. At this time, the average no-load wind speed in the paint room reaches 0.3m/s. The paint mist particles generated during painting can not stay in the air, but rapidly decrease with the air flow, and then the air flow through the exhaust duct. After the bottom environmental treatment, it is discharged from the exhaust airway, and the discharged gas meets the GB16297 "Integrated Emission Standard for Air Pollutants".

During drying: the far-infrared tube and the stainless steel reflector are used to generate heat exchange, and the temperature of the paint room is balanced by the action of the fan, and the excess volatile agent and water are discharged, and most of the hot air is further heated and utilized, so that the baking is performed. The temperature in the room gradually increases. When the temperature reaches the set temperature, the heating tube stops automatically. When the temperature drops below 2°C-3°C below the set temperature, the far-infrared tube automatically works to keep the temperature in the baking room constant. Finally When the baking time reaches the set time, the paint booth will automatically shut down and the paint finishes.