Maintenance And Maintenance Knowledge Of Car Paint Booth

In the process of using the paint room equipment, many paint masters reflect the poor quality of the paint booth, the dust in the room is too high, the construction effect is not good, and sometimes it is not as good as the outdoor effect. In fact, as long as everyone can use and maintain properly These problems can be completely avoided in the car paint booth. Note on using the car paint booth:

1. Before spraying, it is necessary to check whether the air pressure of the spraying is normal, and ensure that the filtering system is clean;

2. Check the air compressor and the oil-water micro-dust separator to keep the paint hose clean;

3. Spray guns, paint hoses and paint tanks should be stored in a clean place;

4. Except for dust removal with a blow gun and sticky cloth, all other pre-spraying procedures should be completed outside the paint booth;

5. Only the spraying and baking process can be carried out in the car paint booth, and the door of the paint room can only be opened when the vehicle enters and exits. When opening the door, the air circulation system must be activated to create a positive pressure to ensure dust outside the room. Can't enter the room;

6, must wear the specified spray paint and wear safety equipment to enter the paint room for operation;

7. When performing baking operations, the flammable materials in the paint booth must be taken out of the house;

8. Non-essential personnel are not allowed to enter the paint booth.

In terms of daily maintenance, to maintain the best results in the car paint booth, the following cleaning and inspection work should be done regularly:

1. Clean the pencil, glass and platform base in the room every day to avoid accumulation of dust and paint dust;

2. Clean the air inlet dust net every week and check whether there is any accumulation of the exhaust dust net. If the air pressure in the room increases without any reason, the exhaust dust net must be replaced.

3. The floor dust-proof fiber cotton should be replaced every 150 hours;

4. The air inlet dust net should be replaced every 300h;

5. Clean the water tray every month and clean the diesel filter on the burner;

6. Check whether the drive belts of the intake and exhaust motors are slack in each quarter;

7. Clean the entire paint booth and floor plan every six months, check the circulating air valve, air inlet and exhaust fan bearings, check the exhaust passage of the burner, clean the deposits in the fuel tank, clean the water-repellent protective film of the paint booth and re-spray ;

8. The entire heat energy converter should be cleaned every year, including the combustion chamber and the exhaust passage. The paint top cotton should be replaced every year or every 1200h.

If the above points are taken into consideration and the reasonable use and maintenance are carried out, the car paint booth will become easier and more tidy during the construction process, and at the same time, the task can be completed with quality and quantity, and the perfect spraying effect will be exhibited.