Several Advantages Of Using High Temperature Baking Room

First, it is fast in the early stage, and the effect is proud. The high-temperature paint room is a set of large-scale equipment. Before use, the car generally has to undergo pre-treatment. This not only eliminates the disadvantages of manual treatment, but also improves the work efficiency and can improve the paint in the paint repair operation. The quality of the surface. This is not only because the high temperature paint room can evenly heat up and quickly dry the paint surface according to the operator's setting, and the high temperature paint room can isolate the pollution caused by external dust and other pollutants on the paint, so that the follow-up can be omitted. Polishing and other paint finishing work.

Second, the working environment is good. In order to keep the air in the paint room clean, all kinds of high-temperature paint room are equipped with filtering devices, such as filter cotton, used to filter the dust entering the air in the paint room, and high-temperature paint The ventilation system of the room will have enough ventilation speed in the paint room to ensure the air in the paint booth. In many cases, the pollution of the paint body surface is caused by human factors, such as the vehicle to be painted has not been thoroughly cleaned. Enter the paint booth, or the painter is not wearing special protective clothing, or the paint room is not clean.

Third, work efficiency is high, quality is guaranteed. Compared with manual painting, baking varnish, high-temperature paint room is a mechanized "one-stop" service, work efficiency is several times higher, even dozens of times. Moreover, when painting, the outside air passes through the primary The filter is filtered and sent to the roof by the fan, and then passed through the top filter to purify and then enter the room. The air in the room is fully descended and flows downward at a speed of 0.3-0.5 m/s to make the paint spray. The paint mist particles can not stay in the air, but are directly discharged outside the room through the bottom air outlet. This continuously circulates and converts the indoor air cleanliness to over 98% when the paint is sprayed, and the air to be fed has a certain pressure. A constant airflow is formed around the car to remove excess paint, thereby maximizing the quality of the paint. The paint surface is smooth and uniform, free of impurities, and has a high degree of polishing.

Fourth, the safety factor is high. The high temperature paint room is generally equipped with a thermostat controller and a safety explosion-proof system. When the car is painted, the damper is adjusted to the paint position, the hot air is circulated, and the temperature in the barn is rapidly raised to the predetermined drying temperature (55°C-60). °C). After the fan filters the external fresh air, it exchanges heat with the heat exchanger and sends it to the air chamber at the top of the paint booth. After a second filtration and purification, the hot air passes through the inner circulation of the damper, except for a small amount. Outside the fresh air, most of the hot air is continuously heated and utilized, so that the temperature in the paint room gradually increases. When the temperature reaches the set temperature, the burner automatically stops; when the temperature drops to the set temperature, the fan and the burner It is automatically opened to keep the temperature in the paint room relatively constant. Finally, when the paint time reaches the set time, the paint room is automatically shut down and the paint construction is safely finished.