Instructions for use of car lift

Instructions for use of car lift

1. Before use, remove the equipment and sundries that hinder the operation of the lift, and check whether the operator is normal.

2. The operating mechanism is sensitive and effective, and the hydraulic system is not allowed to crawl.

3. When supporting the vehicle, the four supporting angles should be on the same plane, and adjust the height of the supporting angle rubber pad to contact the supporting part of the vehicle chassis.

4. When supporting the vehicle, the vehicle cannot be supported too high, the four brackets should be locked after being supported.

5. After the lifted vehicle enters, the lifter support #} should be adjusted and moved to the lifting point specified for the vehicle.

6. When lifting, personnel should leave the vehicle. When lifting to the required height, the safety lock pin must be inserted, and safety and reliability must be ensured before starting work under the vehicle.

7. Except for subsistence allowances and minor repairs, other cumbersome and cumbersome tasks must not be operated on the lifter.

8. The lift shall not rise and fall frequently.

9. When supporting the truck, the lift must be steady and the landing must be slow.

10. It is strictly forbidden to lift the lift when someone is working.

11. If the operating mechanism is not working properly, the motor is not synchronized, the bracket is not flat or the hydraulic part is leaking, you should report for repairs in time and do not operate with diseases.

12. After the operation is completed, the debris should be removed and the area around the lift should be cleaned to keep the site tidy.

13. Regularly (half a year) remove the accumulated water in the oil cylinder of the lift and check the oil volume. If the oil volume is insufficient, the same brand of pressure oil should be filled in time. Also check; 1'#7 slide and lift drive

Gears and seams.