Matters needing attention in color mixing operation in furniture baking room

Matters needing attention in color mixing operation in furniture baking room

With the development of my country's economy and the progress of the market economy, the use of furniture baking booths has become very common. Do you know the things that you need to pay attention to in the color mixing operation of this equipment? Friends who are interested in this area will come and learn about it.

(1) The pressure of the spray gun must be in accordance with the manufacturer's regulations, too high or too low will directly affect the color and the arrangement of silver powder.

(2) The pressure of some brand paints in the third thin spray must be reduced or thinner added.

(3) The color of the test spray plate must be completely over-colored to minimize color difference.

(4) When spraying the varnish layer, make sure that the paint is dry to the touch before spraying, so that the varnish layer will not run off.

(5) When using infrared light to switch IR light. Be careful not to be too close to the test spray plate.

(6) The color matching time is from 9 am to 3 pm.

(7) Small can match colors in the sun, which can cause damage to the eyes and is not easy to match colors.

(8) There must be three different angles to compare the color difference, 90°, 45°, 120°.

(9) The fuel tank cover can also be used to match the color of the test spray plate in the standard light source box.

(10) Do not match colors in places with insufficient luminosity.

(11) Do not use fluorescent lamps to match colors, as it is easy to produce color difference.

(12) Pay attention to protection when testing spray to avoid harm to human body.

(13) To establish a formula system for vehicles, it can save a lot of time and materials.

(14) When fine-tuning, use the color masterbatch on the formula table as much as possible. Don't add new color masterbatch.

(15) If you must add a new color masterbatch, it should not exceed ten colors.

(16) Before fine-tuning, the characteristics of all color masterbatches must be memorized.

Through the content explained in the article, you can generally understand the problems that this furniture paint room needs to pay attention to when performing color mixing operations. I hope that the content explained in the article will be helpful to everyone and can be used for reference in the future purchase and use.