The characteristics of furniture paint room
Aug 15, 2020
Leave a message
The characteristics of furniture paint room
Painted furniture has become a symbol of modern fashionable decoration. Whether in rural or urban areas, modern people's fashionable decoration furniture tends to be painted furniture. The main reason is that it is beautiful, non-fading, moisture-proof and durable. The biggest feature is that after the furniture factory provides healthy and environmentally friendly paint, the home will not be threatened by health.
Following this, the paint booth industry market has also begun to transform, from simple car paint booths and hardware paint booths to large-scale furniture paint booths, providing furniture manufacturers with environmentally friendly polishing tables, furniture paint booths, and spray booths. A series of equipment such as drying room.
Since its launch, furniture baking room has been one of the most popular products by new and old users. It has filled a gap in the baking paint of wood products and solved the working environment of spray paint choking and low baking temperature for users.
product manual:
A. Wood product spraying/painting booth has reasonable design, good performance, fast heating speed, good spraying environment, average air flow rate is about 0.35m/s, heating speed can reach working temperature of about 55℃ in 10-16 minutes, saving energy. The heat per unit volume of the heated air is high and evenly distributed, which provides a reliable guarantee for the temperature of each point in the room. A variety of paint mist filtering devices are used to create a better working environment for technicians to spray paint, which meets the requirements for high-level spray baking to the greatest extent.
B. Wood product spraying/painting room can be designed as a spraying room and a channel type of painting room, which is a tandem type spraying/painting room with first spraying and then baking, which saves time, speeds, and streamlines operations.
C. The wood product spraying/baking booth can be designed as a spraying/baking studio body, which is easy to operate and reliable.
D. Wood product spraying/painting room can be designed as a Zhonglian channel pendant operation. The effective size of the spraying/painting room can reach about 40m long. It provides customers with assembly line operation. The size and technical parameters are designed, manufactured and installed according to user requirements
The high-efficiency, energy-saving, high-quality, and environmentally friendly Weilongda infrared spray paint booth is the inevitable direction of the development of the paint industry. With the progress of society, non-toxic and low-volatility water-soluble baking paints will inevitably replace various paints and coatings containing benzene. This has been proved by the development status quo of the clothing industry in developed countries and my country. The infrared baking paint equipment directly radiates the heated body without media conversion, and has good penetration, so that the paint coating is cured from the inside and outside, avoiding the drying method of diesel baking paint and ordinary electric heating paint products from the outside to the inside. The water and solvent of the inner coating are volatilized through the surface of the cured paint, thereby destroying the effect of the surface treatment.
1. Energy saving: The electric heating conversion efficiency of carbon fiber far-infrared quartz heating tube is more than 95%, which saves more than 30% of energy than ordinary electric heating tubes, and is more suitable for the demand for energy utilization in modern society
2. Environmental protection: The product does not emit any harmful gases or substances during the heating process, and does not consume oxygen and moisture in the air, and there is no noise.
3. Good baking effect: carbon fiber far-infrared quartz electric heating tube, because it uses its own far-infrared radiation heating (rather than convection and conduction, such as fuel type and electric heating type), it will hardly The air is heated, so as to avoid the secondary pollution of the air flow on the surface of the paint. The carbon fiber electric heating tube far infrared has the principle of penetrating radiation heating. The process of heating the paint surface by the paint baking lamp is actually a process of radiation penetration, so that the water and solvent in the paint will evaporate first during the baking process , Will not cause bubbles and pores on the surface of the dry paint layer due to the evaporation of the water and solvent inside, so the effect of baking will be better, which can effectively improve the quality of the paint surface, increase the paint film and increase the strength. Toughness is better.
4. Economical and practical: The design breaks through the ideas of traditional paint-baking rooms, reduces pipelines and heating mechanical systems, greatly reduces hidden troubles and avoids the disadvantages of huge energy consumption of ordinary electric paint-baking rooms, and low operating costs.
Main features of the paint room:
First, it reduces pipelines and heating mechanical systems, greatly reduces hidden troubles and avoids the huge energy consumption of ordinary electric heating paint booths;
Second, the utilization rate of plant space is improved and the cost is reduced;
Third, prolong the service life of the paint booth;
Fourth, reduce the consumption of consumables such as filter cotton;
Fifth, apply various paint types;
Send Inquiry

